✨ Step-by-Step
1️⃣ Clean the tumbler
Wipe the surface with alcohol and let it dry fully.
Do not touch after cleaning.
2️⃣ Peel backing
Peel off the backing.
The design will be sticky.
3️⃣ Position carefully
Hold the wrap over the tumbler to line it up.
Once it touches, it sticks - take your time.
4️⃣ Apply from the middle
Stick the centre first, then slowly smooth outward.
Use the squeegee to press firmly as you go.
5️⃣ Press firmly
Rub over the whole design, especially edges, for 30–60 seconds.
6️⃣ Peel top film
Slowly peel off the clear top film.
If the design lifts, press again and wait a few seconds.
⏳ After Application
Wait 24 hours before washing
Full bond after 48 hours
🧼 Care Instructions
Hand wash only
No dishwasher or microwave
Do not soak
Avoid harsh scrubbing